The Evolution by Goldline

Our vision with the Evolution has been to take more than 8 years of research and analysis of existing Goldline installations to create an all new machine that improves on the original in almost every area.

Safer, faster, more flexible.  The Evolution is the future.

Features

Feeding and Delivery Section

Flat cutting plate, uses a patent pending shuttle system which delivers perfect registration and giving 10-15% increase in productivity compared to a clamshell press.

Variable speed shuttle for operator control dependent on substrate.
For improved efficiency, the shuttle mechanism features an air and brush system to remove debris from the bottom platen on every cycle.

Platen System

Electronically adjustable cutting pressure thanks to an operator friendly touch screen.

The main platen is powered by a dual knuckle system giving it maximum cutting pressure of over 550 tons.

Chase & Tool Change Over

Rear accessible chase system to improve safety as operators access the machine from the back to make ready.

A centre line system means tools are fixed in place and fully aligned quickly and a reduction gear is used for chase turnover. Once in position, multiple hydraulic locks secure the chase in place to maintain perfect registration.

Diecutting Section

Make ready times are reduced thanks to electronic pressure setting, and the powerful press section delivers up to 550 tons of cutting pressure.

As standard, the Evolution is supplied with a semi hard cutting plate. Hardened steel cutting plate is an option (54 rockwell).

Machine Features

Designed with safety in mind, the machine is equipped with light guards at all possible trap points. Due to the design, the operators do not need to gain access to the inside of the machine or sit on a moving bed like on a traditional clamshell platen. Job changeover is hazard free.

Computerised control system and 3D touch screen can immediately trace and show machines status, providing fast fault finding. The main touch screen controls show all data the operator needs, from changing pressure to counting down how many diecuts to job completion.

Electrics

Siemens system, Omron sensors, Mitsubishi PLC. For USA market, Alan Bradley electronics available upon request.

For immediate off site fact find and to minimise downtime, the machine is connected to online diagnostics.

Speed & Control

Ergonomically designed controls for easy use.

Built in safety feature requires operators to use both hands to operate the machine.

Touch screen system for easy set up and change over. Electronic pressure setting for fast make ready.

Laser Guarding

Full laser guarding at all trap points ensuring the operators safety.

Tailored to Your Needs

The Goldline Evolution is available now in a full range of sizes to suit all applications.

Model

Maximum Sheet Size

Maximum Cutting Size

GL-1700 1800*1300mm 1700*1200mm
GL-1900 2000*1400mm 1900*1300mm
GL-2100 2200*1700mm 2100*1600mm
GL-2500 2600*1800mm 2500*1700mm
GL-2700 2800*1800mm 2700*1700mm
GL-3000 3100*1900mm 3000*1800mm
GL-3200 3300*2000mm 3200*1900mm

Don't Get Left Behind. Be Part of the Revolution!

For more information call +44 (0)1772 508 125 or email sales@goldlineevolution.com